Gefen EXT-AVSCALER-PRO Manual de usuario descargar pdf (Pagina 8)

IR Receiver1

This receivers will accept commands from the included RMT-SR-IR remote

control. There must be line-of-sight between this receiver and the remote control

for successful operation to occur.

Power Indicator LED2

This LED indicator will become active once the included 5V DC power adapter

has bee properly connected between the sender unit and an open wall power

socket.

Selected Input LED3

Each input source has an LED that will become active when it is selected. All

input sources are listed below.

CV Composite input

SV S-video input

Comp Component input

HDMI 1 HDMI 1 input

HDMI 2 HDMI 2 input

DVI DVI input

RS-232 Serial Communications Port4

This port can accept commands from an RS-232 device to control the input

switching. Please see page 17 for more details on this feature.

Analog Stereo Input Port for Composite5

This input will accept audio from one pair of RCA analog stereo cables for use

with the composite input.

Composite Input Port6

This input will accept video from one RCA composite source. The composite

source will be digitally converted for output through the HDMI Output Port.

Analog Stereo Input Port for Component7

This input will accept audio from one pair of RCA analog stereo cables for use

with the component input.

24V Power Supply Input Port8

Connect the included 24V DC power supply to this input. Once properly

connected between the unit and an open wall power socket, the Power Indicator

LED should become active.

Stereo Speaker Terminals9

The stereo speaker output terminals use spring-loaded compression. These

terminals are designed to accept 8Ω speakers.

UNIT PANEL DESCRIPTIONS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Sin comentarios

Gefen EXT-AVSCALER-PRO Manual de usuario Pagina 8