Gefen EXT-DVI-16416 Manual de usuario descargar pdf (Pagina 12)

1 LED Button Press Indicator

This LED will activate momentarily upon each button press. This visual indicator

is to inform the user that a command has been sent by the IR remote control.

2 Display and Source Selection Buttons

These buttons will be used to send display and source selections to the 16x16

DVI Matrix.

Routing Sources to Displays

Issuing a routing command is a two step process. The ﬁ rst step will be to select a

the display (1-16) which a source will be routed to in the next step. Once the display

has been entered, the source can then be selected. Select the source (1-16) which

will be routed to the display selected in the previous step. For example, to route the

source connected to input 6 to the display connected to output 4 the input steps

would be the following:

1 Press button 4 (display) on the RMT-16416IR remote control.

2 Press button 6 (source) on the RMT-16416IR remote control.

3 The source will immediately be routed to the display.

RMT-16416IR REMOTE DESCRIPTION

RMT-16416IR

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 50 51

Sin comentarios

Gefen EXT-DVI-16416 Manual de usuario Pagina 12